Stipt 2K Coating can be applied as a protective layer in wheel arches and on the bottom of your car. This is a high-gloss transparent protective layer with a very high resistance to chemicals, petrol and weather influences. Maximum wear and scratch resistance. Excellent flow. Clean the surface to be treated, dry and free of grease. Tape surrounding parts. Instructions:
1 Shake for two minutes.
2 Remove the red knob from the lid and turn the spray can over. Then place the red button on the pin at the bottom of the spray can.
3 First place the aerosol can on the lid (nozzle down), then on a firm flat surface. Then press the red button firmly with the palm of your hand until it stops.
4 Shake the aerosol again for two minutes so that both components (paint and hardener) can mix and the hardening process is started. The product is ready to use. Start spraying a sample.
Precautionary statements: P101 P102 P103 P210 P211 P251 P261 P271 P305 + P351 + P338 P312 P337 + P313 P410 + P412 P501
Additional information: Formation of explosive mixtures possible without adequate ventilation.
This is a high-gloss transparent protective layer with a very high resistance to chemicals, petrol and weather influences.